Plotting in a square the map edge cuts

A USGS map is bounded by lines of latitude and longitude, and the UTM grid is tilted against them, so every edge of every map cuts off a row of grid squares. When the point you need is in one of them, a grid line your tool measures from may not be printed.

There is one rule, not a special procedure for each case: register the tool against the line you have. A UTM scale spans exactly one grid square, so if you put its far end — the 1,000 m mark — on the opposite line, its zero lands exactly where the missing line would be. The numbers never change, and there is nothing to subtract.

Both the grid tool and the corner scale measure from a square's west and south lines. So a missing west or south line needs the far-end move; a missing east or north line needs nothing at all — the tool just hangs over the edge of the map. Telling those apart is half the skill.

Each case is worked on a real feature of the Sharktooth Peak map, on its NAD 27 grid, with either the grid tool or the corner scale. Then try some yourself.